CMS Tecnocut Jetpower Evo

High-pressure intensifier

Request information
CMS Tecnocut Jetpower Evo

CMS brought about a new concept in ultrahigh pressure intensifiers, enhanced by technological solutions designed to satisfy the needs of the most demanding users. This new technology is based on an intensifier equipped with several pressure multipliers: independent, parallel and electronically synchronized. This innovative solution results in an ever-constant pressure avoiding any drops typical of traditional opposed-cylinder intensifiers.

  • Highly constant pressure and no accumulator
  • Higher stability of the dynamic pressure signal to ensure a superior cutting quality
  • Lower wear of all high-pressure circuit components of the machine, longer life of the materials and reduced maintenance
  • The 3 independent cylinders technology allows shutdown of any cylinder that needs servicing; this means the operator can choose the maintenance schedule, without downtime for the machine
  • Software-based electronic control of cutting pressure
  • Electronic monitoring of temperature, pressure and filter clogging
  • Hydraulic pump with variable flow rates
  • Hydraulic cylinders return circuit with independent pump
  • Air/oil exchanger for hydraulic circuit cooling (water/oil option)
  • It can be connected to any Stand-Alone cutting system

Technical data

Tecnocut Jetpower evo 40 HP Tecnocut Jetpower evo 60 HP
Power 30 kW / 40 HP 45 kW / 60 HP
Multipliers 2 3
Max water pressure 4150 bar / 60.000 psi 4150 bar / 60.000 psi
Max water flow range 2,7 lpm / 0,71 gpm 5 lpm / 1,32 gpm
Max diam orifice / 0,30 mm / 0,012 in 0,40 mm / 0,016 in
Voltage 400V +/- 5% 50-60 Hz (Different voltages and frequencies on request)
Download documentation

Constant outlet pressure

Constant outlet pressure for a higher cutting quality. Hydraulic intensifier up to 3 independent and electronically synchronized parallel cylinders to guarantee a constant signal of output pressure without the use of an attenuator.

Redundant architecture

Redundant architecture to prevent machine downtime. The 3 independent cylinders technology allows to bypass a single cylinder that needs maintenance, while the machine is working, avoiding unnecessary downtime.

Lower maintenance costs

The parallel cylinders architecture is designed for a low cycle frequency in order to reduce the high-pressure components wear and consequently allowing 25% less maintenance costs.

Consumption reduction

Lower consumption and operative costs. Lower consumption and operative costs. Water flow rate up to 5 l/min to satisfy a wide range of cutting applications, adapting the oil consumption thanks to an independent variable flow pump for hydraulic circuit.

Various other models available.

Contact us for more information. Our team of experts is ready to help you select the best industrial cutting machine for your specific production needs.

Contact us
Loading...