Sanson F1 Edi

Automatic Die-cutting Machine

Request information
Sanson F1 Edi

Functional characteristics

Numerical Control with PC and visual display terminal

An important characteristic of the Sanson F1 EDI is the ease of use and quick learning, even for non-specialized technical personnel. The exact outline of the work phase is ensured by a powerful PC with Windows operating system, a 15” color LCD TFT touchscreen with USB input and CD-ROM, network cards and remote teleassistance.

The different setting and programming operations are simple and guided, in order to make the most of the material to be cut.

An efficient and practical CAD+NESTING optimization system is also available.

Clamp feeder

The success of a cutting system which grants fast execution and allows to save material is not determined exclusively by the die-cutting machine but also by the system used to feed the material. The clamp feeder has been designed for both multi-layer and single layer materials, allowing for feeding accuracy and speed double that of traditional roller systems; minimizing waste and allowing to save up to 10% of the material.

“Pit-stop” die-cutter changing device

Combinable with the new generation automatic die-cutting Sanson F1. It holds 14 plates. Easy to use graphic interface.

  • Contains 4 or 14 plates
  • Integrated cutting control software with a simple graphic interface

Sanson F1 Edi

Carriage – custom sizes

Work table (mm) Workable area (mm) Standard (mm) Power (t) Piston stroke (mm)
A 2300×550 2000×500 500×500 30 10-160
B 2550×750 2000×700 700×700 30 10-160
C 2400×700 2000×600 600×600 45×60 10-160
D 2500×1000 2000×1050 1000×700 45×60 10-160
E 2900×1150 2500×1100 1000×1100 60 10-160

Dimensions (not including roll holder and electrical box)

Width (mm) Depth (mm) Height (mm) Standard (mm)
A 2800 4220 2720 1800
B 2900 4620 2720 1800
C 2800 4420 2780 1800
D 2900 5220 2780 1800
E 3300/3700 5220 2780 1800/2000

Belt width – Weight Kg.

30T 45T 60T
A 5500 – –
B 7500 –
C – 7300 7800
D – 8200 9000
E – – 9200

Sanson F1 Edi (360° turning head)

Carriage – custom sizes

Work table (mm) Workable area (mm) Standard (mm) Power (t) Piston stroke (mm)
F 2500×700 2300×700 600×600 30/45-60 10-160
G 2900×1100 2500×1160 900×900 45-60 10-160

Dimensions (not including roll holder and electrical box)

Width (mm) Depth (mm) Height (mm) Standard (mm)
F 2900 4420 2780/2840 1800
G 3400/3800 5420 2840 1800/2000

Belt width – Weight Kg.

30T 45T 60T
F 6000 7500 8000
G – 10000 10500

Sanson F1 Edi

Carriage – custom sizes

Standard
(mm)
Power
(t)
C 600×600 80-100
D 1000×700 80-100
E 1000×1100 80-100

Dimensions (not including roll holder and electrical box)

Width (mm) Depth (mm) Height (mm)
C 3400 4220 2830/2880
D 3500 5220 2830/2880
E 3800/4300 5220 2830/2880

Weight Kg.

80T 100T
C 8000 9000
D 9400 10400
E 9600 10600

Special dimensions and power on request

Technical characteristics

The SANSON F1 EDI is the first patented automatic machine with electrical technology without hydraulic system, which brings many advantages such as:

  • Better cut control;
  • Possibility to differentiate and optimize cutting operations according to materials and die type;
  • 50% cost reduction;
  • Power usage only during effective cutting time;
  • Reduced noise;
  • Lower maintenance;
  • Smaller overall dimensions;
  • Reliability and higher cycle repetition;
  • Greater respect for the environment;
  • Integrated cutting control software with a simple graphic interface;
  • Cut regulation simplified by using the height of the cutting die.
Loading...