CMS brought about a new concept in ultrahigh pressure intensifiers, enhanced by technological solutions designed to satisfy the needs of the most demanding users. This new technology is based on an intensifier equipped with several pressure multipliers: independent, parallel and electronically synchronized. This innovative solution results in an ever-constant pressure avoiding any drops typical of traditional opposed-cylinder intensifiers.
| Tecnocut Jetpower evo 40 HP | Tecnocut Jetpower evo 60 HP | |
|---|---|---|
| Power | 30 kW / 40 HP | 45 kW / 60 HP |
| Multipliers | 2 | 3 |
| Max water pressure | 4150 bar / 60.000 psi | 4150 bar / 60.000 psi |
| Max water flow range | 2,7 lpm / 0,71 gpm | 5 lpm / 1,32 gpm |
| Max diam orifice / | 0,30 mm / 0,012 in | 0,40 mm / 0,016 in |
| Voltage | 400V +/- 5% 50-60 Hz (Different voltages and frequencies on request) | |
Constant outlet pressure for a higher cutting quality. Hydraulic intensifier up to 3 independent and electronically synchronized parallel cylinders to guarantee a constant signal of output pressure without the use of an attenuator.
Redundant architecture to prevent machine downtime. The 3 independent cylinders technology allows to bypass a single cylinder that needs maintenance, while the machine is working, avoiding unnecessary downtime.
The parallel cylinders architecture is designed for a low cycle frequency in order to reduce the high-pressure components wear and consequently allowing 25% less maintenance costs.
Lower consumption and operative costs. Lower consumption and operative costs. Water flow rate up to 5 l/min to satisfy a wide range of cutting applications, adapting the oil consumption thanks to an independent variable flow pump for hydraulic circuit.
Contact us for more information. Our team of experts is ready to help you select the best industrial cutting machine for your specific production needs.
Contact us