CMS Tecnocut E-pump

Hybrid intensifier

Request information
CMS Tecnocut E-pump

Tecnocut E-Pump is the latest in the range of intensifiers by CMS Metal Technology, born from the continuous research by CMS for upgraded outcomes, performances, energetic efficiency and reduced environmental impact in the world of pressure intensifiers for waterjet cutting applications. The novelty is represented by a project entirely realized inside the CMS technical offices and materialized in an innovative product which combines the power density of the hydraulic pumps with the energetic efficiency of a direct mechanical architecture.
The system simplicity translates in an important reduction of components: up to 95% less than a traditional hydraulic intensifier.

Tecnocut E-pump comes to life with the use of an electro-hydrostatic unit linked directly to the long-run pressure multiplier cylinders, therefore reaching a functioning efficiency higher than 31% when compared to traditional hydraulic intensifiers.
The intensifier is equipped with an integrated intelligence with portable tablet (Wi-Fi) and touch screen for monitoring operating parameters and running the diagnostic of the high-pressure hydraulic components

Tecnocut E-pump can be installed on any cutting table, even from third-parties.

Technical data

5

TECHNICAL CHARACTERISTICS *
ABSORBED POWER (orifice 0.38 to 3800 bar) 30 KW
MAXIMUM ABSORBED POWER WITH CLOSED HEAD 2,4 KW
FUNCTIONING MAXIMUM PRESSURE 4130 bar
MAXIMUM WATER CAPACITY A 3700 bar 5 l/min
ORIFICE MAXIMUM DIAMETER A 3700 bar 0.40 mm
TOTAL DIMENSIONS LXP X H 1666x906x1529 mm
EMPTY WEIGHT 1400 Kg
TENSION (TRIPHASE) 400 V 50/60 Hz
OIL TANK CAPACITY 13 L
PRESSURE ACCUMULATOR CAPACITY 1.15 L
BELT RUN 200 mm
TEMPERATURE REQUIRED – WATER INPUT (min – max accepted) 5 – 25 °C
NOMINAL ENVIRONMENT TEMPERATURE (min – max accepted) – 40 °C
NOMINAL NOISE LEVEL 70 db

* BFT Technology. Technical data may vary according to different configurations.

Video

Download documentation (IT)Download documentation (EN)

Highest Efficiency

The innovative technology of Tecnocut e-pump ensures 31% more efficiency than a traditional hydraulic intensifier, thanks to a 95% reduction of its hydraulic components and the direct interfacing of the hydraulic unit, in order to eliminate load loss and wear and tear over time.

Maximum Energy Saving

-37% of energy consumption, as a combination of cutting cycles and quick movement with closed head. The hybrid pressure pump with a double effect direct attachment, is optimized to reduce consumption, thanks to the use of a brushless servo-motor controlled by an inverter. Tecnocut e-pump allows to eliminate power surges when turning on, thanks to the primary motor and to the inverter-controlled auxiliary motors which provide better adjustment to work conditions.

Tablet Wi-Fi with HMI WEB

The intensifier is managed by an industrial PLC placed in the electric box, in order to ensure the interface to the CMS cutting tables as well as to those from third-parties.
The HMI control interface is accessible form the 10.4” Wi-Fi tablet and it allows the following operations:

  • Remote diagnostic
  • Power control and management
  • Number of cycles per cylinder control and management
  • Electronic update of the cutting pressure

Remote Management

The intensifier web interface is accessible remotely, through pc or smartphone, to visualize operations, detect possible alarms and activate the Emergency STOP command, in case of necessity

Various other models available.

Contact us for more information. Our team of experts is ready to help you select the best industrial cutting machine for your specific production needs.

Contact us
Loading...